🏔️CENTRAL COLORADO COMMERCIAL ROOFING SPECIALISTS • COTOPAXI, CAÑON CITY, SALIDA, PUEBLOSAME-DAY LEAK SURVEY AVAILABLE
★ 5.0 GOOGLE RATED (23 REVIEWS)• CONKLIN PREFERRED CONTRACTOR (719) 431-2699
Year-Round Interior Closed-Cell SPF • R-6.5/Inch • CONKLIN CERTIFIED

Closed-Cell Spray Foam Insulation for Colorado Metal Shops, Pole Barns & Roof Decks

Stop interior roof sweating, seal drafty purlins, and cut winter shop heating costs by up to 45%. Installed year-round in 30x50 steel buildings, agricultural barns, commercial warehouses, and under-deck OSB roofs.

✓ 18–20 Year Non-Prorated Warranty✓ 100% Tax Deductible (IRS 179)✓ Up to 50% Less Than Tear-Off
Metal Building, Shop & Barn Spray Foam Insulation - Rockin L Roof Coatings LLC Colorado
Metal Building, Shop & Barn Spray Foam Insulation • Colorado Commercial System
18–20 YR WARRANTY
5.0 Google Rating • Conklin Preferred
System Overview

Engineered for Colorado Commercial Facilities

Bare steel workshops, pole barns, equipment garages, and uninsulated commercial warehouses across Fremont, Chaffee, Custer, Pueblo, and Alamosa Counties turn into iceboxes every winter—and sweat condensation onto tools, vehicles, and hay whenever heaters run.

Rockin' L Roof Coatings LLC installs high-density closed-cell spray polyurethane foam (SPF) directly onto interior steel roof panels, wall girts, C-purlins, and OSB roof sheathing. Heated plural-component proportioners allow Neal Lambright and crew to spray interior structures cleanly all winter long.

Unlike sagging vinyl-backed fiberglass blankets that leave air pockets and harbor rodents, closed-cell spray foam expands 30x to create an airtight R-6.5-per-inch thermal barrier, Class II vapor retarder, and up to 250% added structural panel racking strength in a single pass.

Key Restoration Advantages

Eliminates Metal Roof Condensation

Bonds directly to steel and OSB with zero air gap, preventing warm indoor moisture from hitting freezing metal and dripping inside your shop.

Cuts Propane & Electric Heating 45%

Continuous R-6.5 to R-7.0 per inch seals every ridge cap, eave closure, and base rail so your wood stove, mini-split, or tube heater holds warmth effortlessly.

250% Structural Wind Racking Strength

Rigid 2.0+ lb closed-cell foam locks steel panels and purlins together, quieting sheet-metal rattle during 65+ mph Colorado mountain wind gusts.

Clean Masking & Fast 1–2 Day Turnaround

Every window, overhead garage door, lift, beam, and concrete slab is masked before spraying—leaving your 30x50 or commercial shop spotless.

System Specifications

Thermal ResistanceR-6.5 to R-7.0 per Inch (Closed-Cell)
Vapor Retarder Class<1.0 Perm at 1.5" (Stops Condensation)
Substrates BondedR-Panel Steel, Corrugated Metal, OSB, Concrete
Install Season12 Months / Year (Heated Plural Rig)
Typical Shop Size1,200 sq. ft. (30x40) to 50,000+ sq. ft.
Air Infiltration SealMonolithic Zero-Gap Envelope
Precision Application

How Neal & The Rockin L Crew Restore Your Roof

1

On-Site Measurement & Dew-Point Check

Neal measures wall height, roof pitch, purlin depth, and substrate moisture to specify exact closed-cell foam thickness.

2

Full Masking of Doors, Windows & Floors

Overhead doors, wiring conduits, windows, framing faces, and concrete floors are wrapped in heavy poly film.

3

Heated Plural-Component Closed-Cell Spray

Pre-heated two-component closed-cell polyurethane foam is sprayed evenly across roof decks, gable ends, and walls.

4

Trim, Thermal Inspection & Clean Walkthrough

Masking is removed, floors are swept clean, and Neal verifies uniform thickness and seal integrity with you on-site.

Rockin L Roofing Crew Applying Fluid Restoration Membrane
Conklin Fluid Application • Precision Rolling
Conklin Master Craftsmanship

Applied by Experienced Roofers, Never Subcontractors

Every lap, seam, and penetration is hand-detailed and verified before the topcoat cures into a monolithic, seamless white barrier that can withstand Colorado hail, mountain UV, and sub-zero freeze cycles.

Frequently Asked Questions • Metal Building, Shop & Barn Spray Foam Insulation

Yes. Because our plural-component spray rig heats the chemical drums and insulated hose lines while we heat the interior enclosure during application, we insulate metal shops, barns, and under-deck OSB roofs across Cotopaxi, Cañon City, Salida, Buena Vista, Westcliffe, and Pueblo all winter.
Direct Dispatch • Cotopaxi Headquarters

Ready to Protect Your Commercial Roof?

Schedule a free, comprehensive on-site roof inspection with Neal. We will evaluate your roof’s condition, test for subsurface moisture, measure square footage, and present clear options tailored to your facility and budget.

Speak Directly With Neal
(719) 431-2699
Shop • Yard • HQ
925 County Road 1A, Cotopaxi, CO 81223
Commercial Inquiries • Plans
100% Free On-Site Commercial Roof Inspections
Non-Prorated 18–20 Year Renewable Warranties
Zero Business Downtime / No Landfill Waste

Schedule Your Free Roof Inspection

Fill out the form below and Neal will follow up with you directly.
Response Preference:
No obligation • Free on-site moisture scan • Direct dispatch from Cotopaxi

Interior Closed-Cell Spray Polyurethane Foam for 30x50 Steel Shops & OSB Decks

Installed year-round—including freezing Colorado winter months—via heated plural-component rigs, Rockin’ L sprays 2.0–2.8 lb closed-cell polyurethane foam directly onto interior metal shop walls, roof panels, C-purlins, and commercial OSB roof decks. One seamless pass delivers R-6.5/inch, Class II vapor control, and 45% lower heating bills.

Rockin' L Roof Coatings LLC • 925 County Road 1A, Cotopaxi, CO 81223 • (719) 431-2699 • Conklin Master Commercial Roofing Contractor | Colorado Secretary of State Good Standing Entity • Google Maps CID 17918996451746365717

Closed-Cell Interior Shop Foam Specification Summary

Application / Engineering Factor Rockin' L Conklin / SPF Specification Benchmark / Conventional Comparison
Aged Thermal R-Value R-6.5 to R-7.0 per Inch Continuous Seal Seals Base Rails, Ridge Vents & Purlins
Moisture & Sweat Control Class II Vapor Retarder (<1.0 Perm @ 1.5 Inches) Permanently Stops Winter Roof Drip
Structural Panel Rigidity Increases Steel Wall/Roof Racking Strength ~250% Completed in 1–2 Days for Most 30x50 Shops

Complete Technical Q&A Reference

Why should I use closed-cell spray foam instead of open-cell foam or fiberglass on a metal building?

Open-cell foam and fiberglass allow moisture vapor to pass through and condense against cold steel panels, causing hidden rust and soggy insulation. Closed-cell foam is water-resistant and acts as its own vapor barrier at 1.5+ inches, bonding tightly to metal and OSB.

How thick should closed-cell spray foam be in a Colorado metal workshop or barn?

Most Central Colorado metal shop owners choose 2 inches on walls (R-13+ with full air seal) and 2 to 3 inches on the underside of the roof deck (R-13 to R-20), completely stopping condensation and dramatically cutting winter heating fuel.